Inconel 718 Supplier in Vadodara
A precipitation-hardenable nickel alloy with very high strength from −250 °C to about 700 °C, and good weldability. Sheet, plate, bar, pipe and flanges — delivered all over India.
Last updated:
What is Inconel 718?
Inconel 718 (Alloy 718, UNS N07718, W.Nr. 2.4668) is a nickel-chromium alloy containing 50.0–55.0% nickel, 17.0–21.0% chromium and 4.75–5.50% niobium. A precipitation-hardenable nickel alloy with very high strength from −250 °C to about 700 °C, and good weldability. It has a density of 8.19 g/cm³ and a minimum tensile strength of 1275 MPa, and is used mainly for aerospace engine parts, oil and gas valve stems and hangers and high-strength fasteners and springs.
- Also known as Alloy 718
- Designations UNS N07718 · W.Nr. 2.4668 · DIN NiCr19NbMo
- Type Nickel-chromium alloy
- Density 8.19 g/cm³
- Strength (min) 1275 MPa tensile · 1034 MPa yield
- Main uses Aerospace engine parts, oil and gas valve stems and hangers, high-strength fasteners and springs
We supply Inconel 718 as sheet, plate, coil / strip, round bar, pipe, tube, flanges, wire, with mill test certificates, from our stock point at GIDC Makarpura, Vadodara.
What is the chemical composition of Inconel 718?
| Ni | Cr | Nb+Ta | Mo | Ti | Al | Fe | C |
|---|---|---|---|---|---|---|---|
| 50.0 – 55.0 | 17.0 – 21.0 | 4.75 – 5.50 | 2.80 – 3.30 | 0.65 – 1.15 | 0.20 – 0.80 | Balance | 0.08 max |
What are the mechanical properties of Inconel 718?
| Tensile strength (min) | 1275 MPa |
|---|---|
| Yield strength 0.2% (min) | 1034 MPa |
| Elongation (min) | 12% |
| Condition | Solution treated + aged bar (ASTM B637 / AMS 5662-5663) |
| Density | 8.19 g/cm³ |
What is the equivalent of Inconel 718?
| Trade name | Generic | UNS | Werkstoff Nr. | DIN |
|---|---|---|---|---|
| Inconel 718 | Alloy 718 | N07718 | 2.4668 | NiCr19NbMo |
Specifications by product form
| Inconel 718 sheet / plate | ASTM B670, AMS 5596 |
|---|---|
| Inconel 718 bar | ASTM B637, AMS 5662, AMS 5663 |
| Inconel 718 forgings | ASTM B637 |
Where is Inconel 718 used?
- Aerospace engine parts
- Oil and gas valve stems and hangers
- High-strength fasteners and springs
- Cryogenic equipment
- Pump shafts
Our advice
718 gets its strength from age-hardening heat treatment. Always specify the condition you need (solution annealed or aged).
Typical specification values for guidance only — always refer to the mill test certificate. Trade names are trademarks of their owners.
Inconel 718 — FAQs
Where can I buy Inconel 718 in Vadodara?
Sagar Sales Corporation (Steel Mall®), GIDC Makarpura, Vadodara, supplies Inconel 718 sheet, plate, round bar, pipe and flanges with mill test certificates, and delivers all over India. Call +91 70162 29319 or send your size on WhatsApp for today's price.
What is the chemical composition of Inconel 718?
Inconel 718 (UNS N07718) typically contains 50.0–55.0% nickel, 17.0–21.0% chromium, 4.75–5.50% niobium, 2.80–3.30% molybdenum, 0.65–1.15% titanium, 0.20–0.80% aluminium, the balance iron and up to 0.08% carbon.
What is the equivalent of Inconel 718?
Inconel 718 is also known as Alloy 718. Its designations are UNS N07718, Werkstoff Nr. 2.4668 and DIN NiCr19NbMo.
What is the density of Inconel 718?
The density of Inconel 718 is about 8.19 g/cm³ (8190 kg/m³). A 1 × 2 m sheet, 1 mm thick, weighs about 16.4 kg.
What is the price of Inconel 718 per kg?
Inconel 718 is priced per kg and depends on the form (sheet, bar or pipe), size, quantity and the nickel market on the day. Send us your size and quantity for a same-day quote.
Get today's Inconel 718 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India