Inconel 601 Supplier in Vadodara
An aluminium-bearing version of 600 with outstanding resistance to oxidation and scaling up to about 1,200 °C. Sheet, plate, bar, pipe and flanges — delivered all over India.
Last updated:
What is Inconel 601?
Inconel 601 (Alloy 601, UNS N06601, W.Nr. 2.4851) is a nickel-chromium alloy containing 58.0–63.0% nickel, 21.0–25.0% chromium and 1.0–1.7% aluminium. An aluminium-bearing version of 600 with outstanding resistance to oxidation and scaling up to about 1,200 °C. It has a density of 8.11 g/cm³ and a minimum tensile strength of 550 MPa, and is used mainly for radiant tubes and burner parts, furnace belts and baskets and thermal processing fixtures.
- Also known as Alloy 601
- Designations UNS N06601 · W.Nr. 2.4851 · DIN NiCr23Fe
- Type Nickel-chromium alloy
- Density 8.11 g/cm³
- Strength (min) 550 MPa tensile · 205 MPa yield
- Main uses Radiant tubes and burner parts, furnace belts and baskets, thermal processing fixtures
We supply Inconel 601 as sheet, plate, coil / strip, round bar, pipe, tube, flanges, wire, with mill test certificates, from our stock point at GIDC Makarpura, Vadodara.
What is the chemical composition of Inconel 601?
| Ni | Cr | Al | Fe | C | Mn | Si | Cu |
|---|---|---|---|---|---|---|---|
| 58.0 – 63.0 | 21.0 – 25.0 | 1.0 – 1.7 | Balance | 0.10 max | 1.0 max | 0.50 max | 1.0 max |
What are the mechanical properties of Inconel 601?
| Tensile strength (min) | 550 MPa |
|---|---|
| Yield strength 0.2% (min) | 205 MPa |
| Elongation (min) | 30% |
| Condition | Annealed plate (ASTM B168) |
| Density | 8.11 g/cm³ |
What is the equivalent of Inconel 601?
| Trade name | Generic | UNS | Werkstoff Nr. | DIN |
|---|---|---|---|---|
| Inconel 601 | Alloy 601 | N06601 | 2.4851 | NiCr23Fe |
Specifications by product form
| Inconel 601 sheet / plate | ASTM B168 |
|---|---|
| Inconel 601 bar | ASTM B166 |
| Inconel 601 pipe / tube | ASTM B167 |
| Inconel 601 forgings / flanges | ASTM B564 |
Where is Inconel 601 used?
- Radiant tubes and burner parts
- Furnace belts and baskets
- Thermal processing fixtures
- Combustion chamber parts
- Catalyst support grids
Our advice
The aluminium forms a tight oxide layer that resists spalling during repeated heating and cooling, which is why 601 is popular for furnace components.
Typical specification values for guidance only — always refer to the mill test certificate. Trade names are trademarks of their owners.
Inconel 601 — FAQs
Where can I buy Inconel 601 in Vadodara?
Sagar Sales Corporation (Steel Mall®), GIDC Makarpura, Vadodara, supplies Inconel 601 sheet, plate, round bar, pipe and flanges with mill test certificates, and delivers all over India. Call +91 70162 29319 or send your size on WhatsApp for today's price.
What is the chemical composition of Inconel 601?
Inconel 601 (UNS N06601) typically contains 58.0–63.0% nickel, 21.0–25.0% chromium, 1.0–1.7% aluminium, the balance iron, up to 0.10% carbon, up to 1.0% manganese, up to 0.50% silicon and up to 1.0% copper.
What is the equivalent of Inconel 601?
Inconel 601 is also known as Alloy 601. Its designations are UNS N06601, Werkstoff Nr. 2.4851 and DIN NiCr23Fe.
What is the density of Inconel 601?
The density of Inconel 601 is about 8.11 g/cm³ (8110 kg/m³). A 1 × 2 m sheet, 1 mm thick, weighs about 16.2 kg.
What is the price of Inconel 601 per kg?
Inconel 601 is priced per kg and depends on the form (sheet, bar or pipe), size, quantity and the nickel market on the day. Send us your size and quantity for a same-day quote.
Get today's Inconel 601 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India