Inconel 600 Supplier in Vadodara
The standard nickel-chromium alloy: resists oxidation up to about 1,100 °C, chloride stress-corrosion cracking and caustic environments. Sheet, plate, bar, pipe and flanges — delivered all over India.
Last updated:
What is Inconel 600?
Inconel 600 (Alloy 600, UNS N06600, W.Nr. 2.4816) is a nickel alloy containing at least 72.0% nickel, 14.0–17.0% chromium and 6.0–10.0% iron. The standard nickel-chromium alloy: resists oxidation up to about 1,100 °C, chloride stress-corrosion cracking and caustic environments. It has a density of 8.47 g/cm³ and a minimum tensile strength of 550 MPa, and is used mainly for furnace muffles, retorts and trays, heat-treatment fixtures and chemical and food processing equipment.
- Also known as Alloy 600
- Designations UNS N06600 · W.Nr. 2.4816 · DIN NiCr15Fe
- Type Nickel-chromium alloy
- Density 8.47 g/cm³
- Strength (min) 550 MPa tensile · 240 MPa yield
- Main uses Furnace muffles, retorts and trays, heat-treatment fixtures, chemical and food processing equipment
We supply Inconel 600 as sheet, plate, coil / strip, round bar, pipe, tube, flanges, wire, with mill test certificates, from our stock point at GIDC Makarpura, Vadodara.
What is the chemical composition of Inconel 600?
| Ni | Cr | Fe | C | Mn | Si | Cu | S |
|---|---|---|---|---|---|---|---|
| 72.0 min | 14.0 – 17.0 | 6.0 – 10.0 | 0.15 max | 1.0 max | 0.50 max | 0.50 max | 0.015 max |
What are the mechanical properties of Inconel 600?
| Tensile strength (min) | 550 MPa |
|---|---|
| Yield strength 0.2% (min) | 240 MPa |
| Elongation (min) | 30% |
| Condition | Annealed plate (ASTM B168) |
| Density | 8.47 g/cm³ |
What is the equivalent of Inconel 600?
| Trade name | Generic | UNS | Werkstoff Nr. | DIN |
|---|---|---|---|---|
| Inconel 600 | Alloy 600 | N06600 | 2.4816 | NiCr15Fe |
Specifications by product form
| Inconel 600 sheet / plate | ASTM B168 |
|---|---|
| Inconel 600 bar | ASTM B166 |
| Inconel 600 pipe / tube | ASTM B167, B516, B517 |
| Inconel 600 forgings / flanges | ASTM B564 |
Where is Inconel 600 used?
- Furnace muffles, retorts and trays
- Heat-treatment fixtures
- Chemical and food processing equipment
- Caustic soda evaporators
- Nuclear steam generator tubing
- Thermocouple sheaths
Our advice
Inconel 600 is the go-to choice when stainless steel scales or cracks at high temperature. For even better oxidation resistance above 1,000 °C, look at Inconel 601.
Typical specification values for guidance only — always refer to the mill test certificate. Trade names are trademarks of their owners.
Inconel 600 — FAQs
Where can I buy Inconel 600 in Vadodara?
Sagar Sales Corporation (Steel Mall®), GIDC Makarpura, Vadodara, supplies Inconel 600 sheet, plate, round bar, pipe and flanges with mill test certificates, and delivers all over India. Call +91 70162 29319 or send your size on WhatsApp for today's price.
What is the chemical composition of Inconel 600?
Inconel 600 (UNS N06600) typically contains at least 72.0% nickel, 14.0–17.0% chromium, 6.0–10.0% iron, up to 0.15% carbon, up to 1.0% manganese, up to 0.50% silicon, up to 0.50% copper and up to 0.015% sulphur.
What is the equivalent of Inconel 600?
Inconel 600 is also known as Alloy 600. Its designations are UNS N06600, Werkstoff Nr. 2.4816 and DIN NiCr15Fe.
What is the density of Inconel 600?
The density of Inconel 600 is about 8.47 g/cm³ (8470 kg/m³). A 1 × 2 m sheet, 1 mm thick, weighs about 16.9 kg.
What is the price of Inconel 600 per kg?
Inconel 600 is priced per kg and depends on the form (sheet, bar or pipe), size, quantity and the nickel market on the day. Send us your size and quantity for a same-day quote.
Get today's Inconel 600 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India