Incoloy 800 Supplier in Vadodara
A nickel-iron-chromium alloy that stays strong and resists oxidation and carburisation at high temperatures. Sheet, plate, bar, pipe and flanges — delivered all over India.
Last updated:
What is Incoloy 800?
Incoloy 800 (Alloy 800, UNS N08800, W.Nr. 1.4876) is a nickel alloy containing 30.0–35.0% nickel, 19.0–23.0% chromium and at least 39.5% iron. A nickel-iron-chromium alloy that stays strong and resists oxidation and carburisation at high temperatures. It has a density of 7.94 g/cm³ and a minimum tensile strength of 520 MPa, and is used mainly for heat exchangers and process piping, furnace components and petrochemical cracking tubes.
- Also known as Alloy 800
- Designations UNS N08800 · W.Nr. 1.4876 · DIN X10NiCrAlTi32-21
- Type Nickel-iron-chromium alloy
- Density 7.94 g/cm³
- Strength (min) 520 MPa tensile · 205 MPa yield
- Main uses Heat exchangers and process piping, furnace components, petrochemical cracking tubes
We supply Incoloy 800 as sheet, plate, coil / strip, round bar, pipe, tube, flanges, wire, with mill test certificates, from our stock point at GIDC Makarpura, Vadodara.
What is the chemical composition of Incoloy 800?
| Ni | Cr | Fe | C | Al | Ti | Mn | Si |
|---|---|---|---|---|---|---|---|
| 30.0 – 35.0 | 19.0 – 23.0 | 39.5 min | 0.10 max | 0.15 – 0.60 | 0.15 – 0.60 | 1.5 max | 1.0 max |
What are the mechanical properties of Incoloy 800?
| Tensile strength (min) | 520 MPa |
|---|---|
| Yield strength 0.2% (min) | 205 MPa |
| Elongation (min) | 30% |
| Condition | Annealed plate (ASTM B409) |
| Density | 7.94 g/cm³ |
What is the equivalent of Incoloy 800?
| Trade name | Generic | UNS | Werkstoff Nr. | DIN |
|---|---|---|---|---|
| Incoloy 800 | Alloy 800 | N08800 | 1.4876 | X10NiCrAlTi32-21 |
Specifications by product form
| Incoloy 800 sheet / plate | ASTM B409 |
|---|---|
| Incoloy 800 bar | ASTM B408 |
| Incoloy 800 pipe / tube | ASTM B407, B514, B515 |
| Incoloy 800 forgings / flanges | ASTM B564 |
Where is Incoloy 800 used?
- Heat exchangers and process piping
- Furnace components
- Petrochemical cracking tubes
- Sheathing for heating elements
Our advice
For long-term service above about 600 °C, where creep strength matters, use the 800H / 800HT versions.
Typical specification values for guidance only — always refer to the mill test certificate. Trade names are trademarks of their owners.
Incoloy 800 — FAQs
Where can I buy Incoloy 800 in Vadodara?
Sagar Sales Corporation (Steel Mall®), GIDC Makarpura, Vadodara, supplies Incoloy 800 sheet, plate, round bar, pipe and flanges with mill test certificates, and delivers all over India. Call +91 70162 29319 or send your size on WhatsApp for today's price.
What is the chemical composition of Incoloy 800?
Incoloy 800 (UNS N08800) typically contains 30.0–35.0% nickel, 19.0–23.0% chromium, at least 39.5% iron, up to 0.10% carbon, 0.15–0.60% aluminium, 0.15–0.60% titanium, up to 1.5% manganese and up to 1.0% silicon.
What is the equivalent of Incoloy 800?
Incoloy 800 is also known as Alloy 800. Its designations are UNS N08800, Werkstoff Nr. 1.4876 and DIN X10NiCrAlTi32-21.
What is the density of Incoloy 800?
The density of Incoloy 800 is about 7.94 g/cm³ (7940 kg/m³). A 1 × 2 m sheet, 1 mm thick, weighs about 15.9 kg.
What is the price of Incoloy 800 per kg?
Incoloy 800 is priced per kg and depends on the form (sheet, bar or pipe), size, quantity and the nickel market on the day. Send us your size and quantity for a same-day quote.
Get today's Incoloy 800 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India