Hastelloy C-276 Supplier in Vadodara
One of the most versatile corrosion-resistant alloys, handling oxidising and reducing chemicals, wet chlorine and chlorides. Sheet, plate, bar, pipe and flanges — delivered all over India.
Last updated:
What is Hastelloy C-276?
Hastelloy C-276 (Alloy C-276, UNS N10276, W.Nr. 2.4819) is a nickel-molybdenum-chromium alloy containing the balance nickel, 15.0–17.0% molybdenum and 14.5–16.5% chromium. One of the most versatile corrosion-resistant alloys, handling oxidising and reducing chemicals, wet chlorine and chlorides. It has a density of 8.89 g/cm³ and a minimum tensile strength of 690 MPa, and is used mainly for chemical reactors and heat exchangers, flue-gas desulphurisation systems and pulp and paper bleach plants.
- Also known as Alloy C-276
- Designations UNS N10276 · W.Nr. 2.4819 · DIN NiMo16Cr15W
- Type Nickel-molybdenum-chromium alloy
- Density 8.89 g/cm³
- Strength (min) 690 MPa tensile · 283 MPa yield
- Main uses Chemical reactors and heat exchangers, flue-gas desulphurisation systems, pulp and paper bleach plants
We supply Hastelloy C-276 as sheet, plate, coil / strip, round bar, pipe, tube, flanges, wire, with mill test certificates, from our stock point at GIDC Makarpura, Vadodara.
What is the chemical composition of Hastelloy C-276?
| Ni | Mo | Cr | Fe | W | Co | C | Mn | V |
|---|---|---|---|---|---|---|---|---|
| Balance | 15.0 – 17.0 | 14.5 – 16.5 | 4.0 – 7.0 | 3.0 – 4.5 | 2.5 max | 0.010 max | 1.0 max | 0.35 max |
What are the mechanical properties of Hastelloy C-276?
| Tensile strength (min) | 690 MPa |
|---|---|
| Yield strength 0.2% (min) | 283 MPa |
| Elongation (min) | 40% |
| Condition | Solution annealed plate (ASTM B575) |
| Density | 8.89 g/cm³ |
What is the equivalent of Hastelloy C-276?
| Trade name | Generic | UNS | Werkstoff Nr. | DIN |
|---|---|---|---|---|
| Hastelloy C-276 | Alloy C-276 | N10276 | 2.4819 | NiMo16Cr15W |
Specifications by product form
| Hastelloy C-276 sheet / plate | ASTM B575 |
|---|---|
| Hastelloy C-276 bar | ASTM B574 |
| Hastelloy C-276 pipe / tube | ASTM B619, B622, B626 |
| Hastelloy C-276 forgings / flanges | ASTM B564 |
Where is Hastelloy C-276 used?
- Chemical reactors and heat exchangers
- Flue-gas desulphurisation systems
- Pulp and paper bleach plants
- Pharmaceutical process equipment
- Waste treatment and incinerator scrubbers
Our advice
C-276 is the default "it must not corrode" alloy for mixed chemical service, and is weldable without loss of corrosion resistance.
Typical specification values for guidance only — always refer to the mill test certificate. Trade names are trademarks of their owners.
Hastelloy C-276 — FAQs
Where can I buy Hastelloy C-276 in Vadodara?
Sagar Sales Corporation (Steel Mall®), GIDC Makarpura, Vadodara, supplies Hastelloy C-276 sheet, plate, round bar, pipe and flanges with mill test certificates, and delivers all over India. Call +91 70162 29319 or send your size on WhatsApp for today's price.
What is the chemical composition of Hastelloy C-276?
Hastelloy C-276 (UNS N10276) typically contains the balance nickel, 15.0–17.0% molybdenum, 14.5–16.5% chromium, 4.0–7.0% iron, 3.0–4.5% tungsten, up to 2.5% cobalt, up to 0.010% carbon, up to 1.0% manganese and up to 0.35% vanadium.
What is the equivalent of Hastelloy C-276?
Hastelloy C-276 is also known as Alloy C-276. Its designations are UNS N10276, Werkstoff Nr. 2.4819 and DIN NiMo16Cr15W.
What is the density of Hastelloy C-276?
The density of Hastelloy C-276 is about 8.89 g/cm³ (8890 kg/m³). A 1 × 2 m sheet, 1 mm thick, weighs about 17.8 kg.
What is the price of Hastelloy C-276 per kg?
Hastelloy C-276 is priced per kg and depends on the form (sheet, bar or pipe), size, quantity and the nickel market on the day. Send us your size and quantity for a same-day quote.
Get today's Hastelloy C-276 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India